Solar cost and quotes
How Much Does Solar Cost for a House?
The cost of solar for a house depends on system size, your roof, equipment, labor, permits, and local utility rules. This tool estimates a starting system size from your monthly kWh or bill and your state's sun hours. Take that size to local installers and compare written quotes for price and savings.
- System size
- 6.4 kW DC
- Panel count
- 16 at 400 W
- Roof space
- 320 sq ft, about 20 per panel
About 6.4 kW in California, or roughly 16 panels and 320 sq ft of roof. Ask a local installer to confirm this for your home.
Estimates only. This is not a system design or a bid. Local installers should confirm size after a site visit. System size is monthly kWh divided by 30.4 days, then by your state's peak sun hours, then by a 0.8 derate.
Key takeaways
Updated
- Solar cost for a house depends on system size, your roof, equipment, labor, permits, and local utility rules.
- This tool estimates a starting system size, panel count, and roof space. It does not give an installed price or a savings amount.
- Cost and savings come from written quotes. Compare price per watt for systems of a similar size.
- The bill option starts from your state's 2025 EIA average residential rate, which you can edit to match your bill.
Example with the tool's default inputs: a home that uses 900 kWh a month in California (about 5.8 peak sun hours a day), with 400 watt panels and a 100 percent offset, starts at about 6.4 kW, or roughly 16 panels and 320 sq ft of roof.
| Result | Default example |
|---|---|
| System size | 6.4 kW DC |
| Panel count | 16 at 400 W |
| Roof space | 320 sq ft |
How much does solar cost for a house?
Berkeley Lab collects installation records for home solar. The table shows the 2024 median installed price per watt it reports for host-owned residential systems in states with a SolarNearMe cost guide, before incentives, next to the starting size this tool gives for 900 kWh a month. These are 2024 prices, so 2026 quotes can differ. Compare written quotes for your home.
| State | Sun hours | Starting size | 2024 median |
|---|---|---|---|
| Oregon | 4.0 | 9.3 kW | $3.6/W |
| Washington | 3.6 | 10.3 kW | $3.7/W |
| California | 5.8 | 6.4 kW | $4.0/W |
| Arizona | 6.6 | 5.6 kW | $3.6/W |
| Texas | 5.3 | 7.0 kW | $4.1/W |
| Florida | 5.3 | 7.0 kW | $4.7/W |
| Nevada | 6.3 | 5.9 kW | $2.9/W |
| Colorado | 5.5 | 6.7 kW | $4.7/W |
| Utah | 5.8 | 6.4 kW | Not listed |
| North Carolina | 4.7 | 7.9 kW | $4.5/W |
Sources: price per watt from Lawrence Berkeley National Laboratory, U.S. Distributed Solar and Storage: 2025 Data Update (systems installed in 2024, before incentives), as quoted in each state cost guide. Utah is not on Berkeley Lab's 2024 state chart. Sun hours are the state averages this tool uses (NREL). Starting size is this tool's output for 900 kWh a month at a 100 percent offset, not a bid.
How much can I save with solar panels?
Savings depend on your utility rate, how much of your bill the system offsets, and local export or net metering rules. The bill option in this tool starts from your state's 2025 EIA average residential rate, and you can edit it to match your bill. Ask installers to model savings for your utility. This page does not promise a savings amount.
How do I get solar quotes near me?
Bring your monthly kWh (or a recent bill) and this estimate to two or three local installers. Ask them to explain any difference from this number, list the equipment in writing, and show price per watt. You can get local solar quotes with one free request on SolarNearMe.
How much does solar cost to install?
Installation is part of a full quote, along with equipment, permits, and any electrical upgrades. Nationally, Berkeley Lab reports that the median U.S. residential system installed in 2024 was 7.2 kW, and the middle range of residential prices ran from $3.0 per watt at the 20th percentile to $5.2 at the 80th. For state figures and sources, see solar panel cost in Oregon or the other state cost guides in the table above.
How does system size affect the quote?
Panel count is the system size in watts divided by the wattage of each panel. This tool defaults to 400 watt panels, which is a common size today, and you can change that number. Plan on about 20 square feet per panel. An installer should confirm usable roof space, setbacks, vents, shade and any HOA or fire-access rules.
Peak sun hours describe how much average daily sun your area gets, not how many hours the sun is up. A home in Arizona can meet the same bill with a smaller array than a home in Washington, because each panel produces more energy. That is why this tool asks for your state, or a ZIP that maps to a state, before it estimates size.
If you expect to charge an electric car, add a major appliance, or want battery backup, tell the installers you get quotes from. They can model a slightly larger array, or a design that is ready for a battery later. The optional offset field in this tool is a rough way to aim above or below 100 percent of your current use.
More calculators
Solar cost and quote questions
How much does solar cost for a house?
Installed cost depends on system size, your roof, equipment, labor, and local permitting. This tool estimates a starting size from your use and sun hours. Local installers can then quote that size. Compare written quotes, including price per watt, rather than relying on a single national figure.
How much can I save with solar panels?
Savings depend on your utility rate, how much of your bill the system offsets, and local export or net metering rules. Use your actual bill as the starting point, then ask installers to model savings for your utility. This page does not promise a savings amount.
How do I get solar quotes near me?
Bring your monthly kWh or a recent bill, plus this size estimate, to two or three local installers. Ask them to explain any difference from the estimate, list the equipment in writing, and show price per watt. You can start that comparison with a quote request on SolarNearMe.
How much does solar cost to install?
Installation cost is part of a full quote, along with equipment, permits, and any electrical upgrades. It varies by roof, site, and contractor. Use this size estimate when you request quotes so the bids you compare are for a similar system.
Does this tool tell me the installed price?
No. It estimates system size, panel count, and roof space. Cost and savings come from local quotes and your utility rules. The rate field can start from a published state average that you should edit to match your bill.
Is this estimate a substitute for a professional design?
No. It is a planning estimate from your use, a state sun-hours average, and a standard derate. It does not account for roof angle, shade, snow, utility interconnection limits, or equipment choices. Share the result with local installers and ask for a site-specific proposal.